Brake Caliper, Removing And Installing, 1LK/1LH TTS: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Torque Wrench 1332 40-200Nm :VAG1332
WARNING:
- Do not damage the brake hose and brake line.
- Do not bend the brake line past the specified form.
- A damaged brake hose or a damaged or bent brake line must be replaced.
NOTE:
Clean bolts before reusing.
Replace damaged bolts.
Always replace self-locking bolts.
NOTE:
In the following description the brake caliper is removed with the brake carrier and brake pads. The brake hose remains connected.
The brake pads remain installed.