Brake Shield, Removing And Installing, Pr 1JL, 1ZD: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal and note the following:
NOTE:
Clean bolts before reusing.
Replace damaged bolts.
Always replace self-locking bolts.
-- Clean the brake shield and the wheel hub.
-- Install the brake rotor. Refer to BRAKE ROTOR, REMOVING AND INSTALLING, PR 1JL, 1ZD .
WARNING:
Risk of accident!
- With the vehicle stationary, firmly press the brake pedal several times so that the brake pads in the operating condition properly seat in their respective position.
- Make sure the brakes are working correctly before driving the vehicle for the first time.