Vacuum Sensor -G608-, REMOVING AND INSTALLING: Removing

Vehicles with 4-Cylinder Engine:

-- Remove the check valve. Refer to CHECK VALVE, REMOVING AND INSTALLING .

Vehicles with 2.5L TFSI Engine

Fig 1: Loosen Clamps And Remove Air Guide Pipe

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamps -arrows- and remove the air duct pipe.

Continuation for All Vehicles:

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers -arrows- and remove the Vacuum Sensor -G608- -1- from the check valve.