Brake Fluid Reservoir, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal and note the following:
-- Coat the plugs on the brake fluid reservoir with brake fluid.
-- Insert the brake fluid reservoir into the plugs in the brake master cylinder.
NOTE:
After inserting, check if the brake fluid reservoir is engaged in the retainers and is seated securely.
-- Secure the brake fluid reservoir with the locking pin -1-.
-- Bleeding. Refer to HYDRAULIC SYSTEM, BLEEDING .
WARNING:
Risk of accident!
- Make sure the brakes are working correctly before driving the vehicle for the first time.