Brake Lamp Switch, Removing And Installing: Removing

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

Vehicles with 1.8L/2.0L TFSI Engine

Fig 1: Identifying Clamps With Air Guide Pipe

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamps -1 and 2- and remove the air guide pipe.

Vehicles with 2.5L TFSI Engine

Fig 2: Loosen Clamps And Remove Air Guide Pipe

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamps -arrows- and remove the air duct pipe.

Vehicles with a TDI Engine

Fig 3: Identifying Vacuum Hose

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the vacuum hose -arrow- and free it up.

-- Free up the vacuum hoses -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamps -1 and 2- and remove the air guide pipe.

Continuation for All Vehicles

Fig 4: Brake Lamp Switch -F- /Brake Pedal Switch -F63- Component Location

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

-- Remove the bolt -3-.

-- Remove the Brake Lamp Switch -F- -1- from the brake master cylinder.