LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 58 (Wiper/Washer Systems [Coupe]) >> 92 Wiper/Washer Systems >> Windshield Wiper System >> Wiper Blade, Removing And Installing >> Removing

Wiper Blade, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.
Fig 1: Bring Windshield Wiper Into Service Position
GWWA92-10076Courtesy of AUDI OF AMERICA, LLC

-- Bring the windshield wiper into service position. Refer to WINDSHIELD WIPER, BRINGING INTO SERVICE POSITION .

-- Lift the windshield wiper arm off the windshield.

-- Press the clip in direction of -arrow A- and slide the wiper blade -1- off of the windshield wiper arm -2- in direction of -arrow B-.

-- Remove the wiper blade.