Garage Door Opener Control Head -E284-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the front interior lamp/reading lamp. Refer to FRONT INTERIOR LAMP/READING LAMP, REMOVING AND INSTALLING .
-- Remove the Anti-Theft Alarm System Sensor -G578-, if equipped. Refer to Anti-Theft Alarm System Sensor -G578-, REMOVING AND INSTALLING .
-- Carefully pry the diffusion lens -2- out of the interior lamp -1- in direction of -arrow-.
-- Release the retainers -3 and 4-.
-- Remove the control head -2- from the front interior lamp/reading lamp -1- in direction of -arrow-.