Cigarette Lighter -U1-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different variant/trim than selected.
Install in the reverse order of removal while noting the following:
CAUTION:
Risk of injury.
- After removing the : T40148 , check to see if the lighter retaining tabs are bent.
- If the retaining tabs are bent, bend them back so the lighter does not slide out.
-- Remove the support -1- on the : T40148 .
-- Slide the piston down and hold it in place.
-- Turn the thumbwheel -4- on the : T40148 counter-clockwise -arrow-. This loosens the release tabs -2- on the cigarette lighter -3- so the : T40148 can be removed.