Electro-Static Discharge Work Surface

WARNING: This page is about a different variant/trim than selected.

Requirement: Make sure nothing, especially metal or other lightweight particles, can get into the headlamp housing.

Fig 1: Identifying Electro-Static Discharge Work Surface VAS 6613
Courtesy of AUDI OF AMERICA, LLC
Make sure also when handling an open headlamp that no oil, grease, silicone or other such materials can contact the headlamp components, otherwise they can turn into steam and fog up the headlamp.
Touching electronic circuits with bare hands can lead to migration.
ESD (electro static discharge) protection: Always follow the German Industry Standardization EN 613-40-5-1 when handling.
Components, assemblies or electronics that have fallen down cannot be used again.
ESD Work Surface :VAS6613 . Refer to ESD Work Surface VAS6613 .