Overview - BOSCH Generator From 2007
WARNING: This page is about a different variant/trim than selected.
NOTE:
The new generators are installed as a running change.
- Nut
- 65 Nm
- Ribbed Belt Pulley
- Generator
- Voltage Regulator
- Removing and installing. Refer to VOLTAGE REGULATOR, REMOVING AND INSTALLING, BOSCH GENERATOR FROM 2007 .
- Carbon brushes, checking. Refer to CARBON BRUSHES, CHECKING, ALL BOSCH GENERATORS FROM 2001
- Bolt
- 1.5 Nm
- Cover
- Bolt
- 3 Nm
- Bolt
- 2.5 Nm