Solar Battery Maintainer :VAS610A MAINTENANCE CHARGING
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Solar Battery Maintainer :VAS6102A
Procedure
-- Secure the :VAS6102A to the interior rearview mirror -1-.
-- Lay the bottom on the instrument panel -2-.
NOTE:
The :VAS6102A must not touch the instrument panel completely. Only the bottom edge may be used for support. If it touches completely, the color of the instrument panel could change.
-- Pull the securing string together so that the :VAS6102A is close to the windshield.
-- Connect the connector for the :VAS6102A to the vehicle diagnostic connection. Connecting is the same as with Vehicle Diagnostic Tester.
-- Check the :VAS6102A functionality. The green LED must come on.