Fuel Tank Pressure Sensor -G400-, REMOVING AND INSTALLING: Removing

-- Remove the EVAP canister. Refer to EVAP CANISTER, REMOVING AND INSTALLING, VEHICLES WITH Fuel Tank Pressure Sensor - G400- / Fuel Tank Leak Detection Module - GX36- .

-- Loosen the clamp -3- and remove the vent hose -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Unclip the bracket -1- at the retainers from the EVAP canister -arrows-.

-- Disengage the bracket with attachments from the EVAP canister and remove.

-- Loosen the hose clamp -2- to remove the vent hose -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -4-.

-- Remove the Fuel Tank Pressure Sensor -G400- -item 1-.