Overview - Rearview Camera System
The rearview camera system assists the driver while driving in reverse by providing the driver with an image of the traffic situation behind the vehicle via the Instrument Cluster Control Module -J285-.
The rear view camera system is switched on when engaging the reverse gear. The system can be activated manually by pressing the Parking Aid Button -E266- in the instrument panel (optional).
The rear view camera system consists of the following components:
- Rearview Camera -R189-
- The Rearview Camera System Control Module -J772- is integrated in the Rearview Camera -R189-
- Information Electronics Control Module 1 -J794-
- Instrument Cluster Control Module -J285-, Display
Other control modules may be installed as optional equipment.
It is not permitted to install an auxiliary license plate for vehicles with rear view camera system as it could impair the function of the rear view camera system.
Fault finding is performed using the "Guided Fault Finding" using the Vehicle Diagnostic Tester.