LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 47 (Lubrication [CNTC,CYFB] (1 Of 2) [Coupe]) >> 17 Lubrication >> Oil Pan/Oil Pump >> Oil Pan Lower Section, Removing And Installing >> Removing

Oil Pan Lower Section, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Disconnect the connector -1- for the Oil Level Thermal Sensor -G266-.

Fig 1: Disconnecting Connector From Oil Level Thermal Sensor G266
GWWN34-10504Courtesy of AUDI OF AMERICA, LLC

Vehicles with Plastic Oil Pan Lower Section

Fig 2: Oil Pan Loosening Sequence
GWWA17-11138Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 through 20-.

-- Remove the oil pan lower section.

Vehicles with Metal Oil Pan Lower Section:

Fig 3: Identifying Lower Oil Pan Bolt Tightening Sequence
GWWA17-10270Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 through 20-.

-- Carefully loosen the oil pan lower section from the bond.

Continuation:

-- If the oil pan lower section is replaced, remove the Oil Level Thermal Sensor -G266-. Refer to Oil Level Thermal Sensor -G266-, REMOVING AND INSTALLING .