Sealing Flange, Removing And Installing, Transmission Side: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the flywheel. Refer to FLYWHEEL, REMOVING AND INSTALLING .

-- Disengage the sealing flange on the alignment sleeves and on the sealing flange -arrows-.

Fig 1: Installing Intermediate Plate

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 through 8-. (There is also equipment with only six bolts depending on the version).

Fig 2: Crankshaft Sealing Flange (Eight Bolts) Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the sealing flange from the bond and then remove it.