LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 43 (Crankshaft, Cylinder Block [CNTC,CYFB] (1 Of 2) [Coupe]) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Transmission Side >> Drive Plate, Removing And Installing >> Removing

Drive Plate, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Flywheel Lock Adapter -VW 558- Installed To Cylinder Block And Drive Plate
GWWN13-10355Courtesy of AUDI OF AMERICA, LLC

-- Insert the Flywheel Lock Adapter: VW558  in the cylinder block and in the hole -A- on the drive plate.

-- Remove the bolts and remove the drive plate.

scientia non olet · About LEMON Manuals