Ribbed Belt, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal and note the following:

-- Install the ribbed belt. Refer to Figure.

-- Turn the tensioning system slightly in direction of -arrow- and remove the : T10060A .

Fig 1: Ribbed Belt For Vehicles With Electro-Mechanical Power Steering

Courtesy of AUDI OF AMERICA, LLC

-- Release the tension on the tensioner.

-- Check whether the ribbed belt is routed correctly.

-- Start the engine and check whether the ribbed belt runs correctly.

There are different procedures depending on the model. Refer to RIBBED BELT, REMOVING AND INSTALLING .