Engine And Transmission, Separating, Fwd Vehicles With Manual Transmission 02Q

Special tools and workshop equipment required 

• Engine Support Bridge - Additional Hooks (2 pc.):10-222A/2 
• Shop Crane:VAS6100 
• Transmission Lift Hook:T40013 

Procedure 

Fig 1: Identifying Console From Transmission, Removal/Installation

Courtesy of AUDI OF AMERICA, LLC

• Engine/transmission assembly removed and mounted on :T10359A  .

-- Remove the starter. Refer to STARTER, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and remove the transmission support.

-- Install the :T40013  on the transmission and close the retainer.

Fig 2: Engaging Workshop Crane VAS 6100 With Additional Hooks 10-222 A/2 At Lifting Tackle

Courtesy of AUDI OF AMERICA, LLC

-- Engage the :VAS6100  with :10 - 222 A /2  on the transmission lift hook.

-- Remove the bolts -1, 2, 5, 6, 7 and 8- connecting the transmission to the engine.

Fig 3: Identifying Bolts On Engine/Transmission Flange, Removal

Courtesy of AUDI OF AMERICA, LLC

-- Remove the transmission from the engine. Pay attention to the intermediate plate while doing so.