Wiring Harness Repair Set - Wire Strippers : VAS1978/3

The : VAS1978/3  is used for professional stripping and cutting of wires.

Fig 1: Identifying Wire Stripper (VAS 1978/3)

Courtesy of AUDI OF AMERICA, LLC

The : VAS1978/3  is a component of the : VAS1978B  and its previous versions.

Wire stripper has an adjustable stop in its pliers-jaws which can be set to the desired length of wire insulation to be removed.

Stripping

-- Set the slideable stop in pliers-jaws to the desired length dimension to be stripped.

-- Insert wire end from front up to stop into jaws of pliers and squeeze the pliers completely.

Fig 2: Identifying Stripping Pliers To Strip Wiring Insulation

Courtesy of AUDI OF AMERICA, LLC

-- Open pliers again and remove the stripped wire end.

-- If necessary, cut wires using side-cutter function on the top of the wire stripper.

Fig 3: Cutting Wire

Courtesy of AUDI OF AMERICA, LLC