Crimping Pliers With Insert
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Wiring Harness Repair Set: VAS1978B
- Wiring Harness Repair Set - Crimping Head - 4-6mm: VAS1978/2A
- Wiring Harness Repair - Crimping Head -.35-2.5mm: VAS1978/1-1
- Wiring Harness Repair - Crimping Plier - Base Tool: VAS1978/1-2
- Wiring Harness Repair - Interchangeable Head: VAS1978/1-3
The : VAS1978/1-2 with the : VAS1978/1-1 and the : VAS1978/2A are components of the : VAS1978B . Additionally there is also the : VAS1978/1-3 . These exchangeable heads with the crimping pliers are inserted to crimp the crimp connector during a wiring harness repair.
| Color of Crimp Connectors | Color of Crimping Slot | Wire Cross-Section | Exchangeable Head |
|---|---|---|---|
| Transparent | None | 0.13 mm2 /0.35 mm2 /0.5 mm2 | : VAS1978/1-3 |
| Transparent | Yellow | 0.35 mm 2 through 0.5 mm 2 | : VAS1978/1-1 |
| Red | Red | 0.5 mm2 - 1.0 mm2 | : VAS1978/1-1 |
| Blue | Blue | 1.5 mm2 - 2.5 mm2 | : VAS1978/1-1 |
| Yellow | Yellow | 4.0 mm2 - 6.0 mm2 | : VAS1978/2A |
NOTE:
Always be sure to use the correct crimping slot for the crimping connection used.
Do not crimp wire insulation.