Wheel Housing Liner Retaining Strip, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Remove the front wheel spoiler. Refer to FRONT WHEEL SPOILER, REMOVING AND INSTALLING .
-- Remove the bolt -2-.
-- If equipped, remove the expanding rivets -arrows-.
-- Carefully warm the retaining strip -1- using a :VAG1416 .
-- If equipped, release the retainer -3-.
-- Lift the retaining strip from the bumper cover -4- using the :T10383/1 and at the same time carefully loosen the bonding.