Sill Panel Trim, Removing And Installing: Installing

Install in reverse order of removal and note the following:

• The vehicle and the trim must be at room temperature.
• The adhesive surfaces must be free of dirt and grease.

-- Remove the adhesive residue from the body.

-- Clean the painted side of the adhesive surface with Cleaning Solution: D 009 401 04  and let dry.

-- Remove the protective film from the adhesive tape -2 and 4-.

Courtesy of AUDI OF AMERICA, LLC

-- Place the sill panel trim -3- on the side sill -1- by pressing the locating pins in the mounts -arrows-.

-- Press the entire length of the sill panel trim onto the side sill.

• Vehicle resting time is at least 30 minutes at room temperature.