LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Heating, Ventilation [Coupe]) >> 80 Heating, Ventilation >> Overview - Heater >> Display Control Head >> Display Control Heads, Removing And Installing

Display Control Heads, Removing And Installing

WARNING: This page is about a different variant/trim than selected.

The removal and installation is identical to a vehicle with an A/C system. Refer to A/C DISPLAY CONTROL HEADS, REMOVING AND INSTALLING .

NOTE:

To check, use the Vehicle Diagnostic Tester in the "Guided Fault Finding" function.

NOTE:

The designations on the display control heads -1 and 3- should actually read "Heating". However, since heating without an A/C system is only offered in a few markets, the designation "A/C system" was kept for the heating.