Commercially Available Tools And Materials
WARNING: This page is about a different variant/trim than selected.
| Overview | Reference |
|---|---|
| Fin comb | see illustration |
| Charging hoses 5/8" - 18 UNF with valve opener | see illustration |
| Connection piece for refrigerant cylinder and seal with quick-release coupling connection or threaded connection 5/8" - 18 UNF | see illustration |
| Valve caps 5/8"-18 UNF | see illustration |
| Pressure gauge set with pressure reducer for nitrogen | see illustration |
| Quick-release coupling adapter for service connections, 2x included in scope of delivery of service station | see illustration |
| The wrench size depends on the threaded connections on the refrigerant lines. | Not illustrated |
| Valve opener for charging hoses | Not illustrated |
| Connecting nipple for conical seal 5/8"-18 UNF | Not illustrated |
| Compressed-air gun with rubber end piece | Not illustrated |
| Combined fine filter unit for compressed-air system (oil, dirt and water separator as used for painting facilities). | Not illustrated |
| Valve opener for Schrader valve | Not illustrated |
| Hand shut-off valve 5/8"-18 UNF | Not illustrated |
| Recycling container for refrigerant R134a | Not illustrated |
| Digital thermometer | Not illustrated |
| Protective gloves not illustrated | Not illustrated |
| Protective glasses | Not illustrated |
| Refrigerant R134a with cylinder (capacity as required) | Not illustrated |