Vehicle Electrical System Control Module Bracket, Removing And Installing: Removing

Courtesy of AUDI OF AMERICA, LLC

-- Remove the instrument cluster. Refer to INSTRUMENT CLUSTER WITH Instrument Cluster Control Module -J285-, REMOVING AND INSTALLING .

-- North American market-specific: remove the driver side knee airbag. Refer to KNEE AIRBAG WITH IGNITER, REMOVING AND INSTALLING .

-- Cut the cable tie -arrow-.

-- Disengage fuse panel C and push it aside. Refer to Fuse Panel C -SC- UNDER LEFT INSTRUMENT PANEL, REMOVING AND INSTALLING .

-- Remove the Front Parking Aid Warning Buzzer -H22-. Refer to Front Parking Aid Warning Buzzer -H22-, REMOVING AND INSTALLING .

-- Remove the Vehicle Electrical System Control Module -J519-. Refer to Vehicle Electrical System Control Module -J519-, REMOVING AND INSTALLING .

-- Remove the bolts -2, 3 and 6-.

Courtesy of AUDI OF AMERICA, LLC

-- Push the bracket -1- far enough forward from the crossmember until the alignment pins -4 and 5- are disengaged.

-- Cut the cable ties -arrows-.

-- Free up the wiring harness on the mount.

-- Remove the bracket to the vehicle interior.