Fuse Panel C -SC- UNDER LEFT INSTRUMENT PANEL, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the driver side instrument panel cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
-- Release the tabs -2 and 4- in direction of -A arrows-.
-- Pull fuse panel C -3- toward the rear out of the bracket -1- in the direction of the -arrow B-.
-- Remove the wires.
NOTE:
Check the exact assignment in the current wiring diagram. Refer to the appropriate Wiring Diagram.