LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (Body Front [Coupe]) >> 50 Body Front >> Fender >> Fender Brace, Removing And Installing >> Removing

Fender Brace, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the headlamps. Refer to HEADLAMP, REMOVING AND INSTALLING .

-- For vehicles with a TDI engine loosen and set aside the fuel filter. Refer to the appropriate service information .

-- Remove the air filter housing. Refer to OVERVIEW - AIR FILTER HOUSING .

-- Free up the wires -2- on the air filter housing bracket -1- using the :80-200  .

GWWA24-10922Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the bracket.

-- Remove the bolts -1 and 3-.

GWWA50-10833Courtesy of AUDI OF AMERICA, LLC

-- Remove the fender brace -2-.