LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (Cooling System [CNTC,CYFB] (1 Of 2) [Coupe]) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Front Coolant Pipe, Removing And Installing >> Removing

Front Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the bolts -1 and 3-.

GWWA23-10658Courtesy of AUDI OF AMERICA, LLC

-- Release the catch in direction of -arrow- and remove the cover -2-.

-- Free up the coolant hose -2-.

GWWA23-10659Courtesy of AUDI OF AMERICA, LLC

-- Open the catches in direction of -arrows- and remove the upper air duct -1-.

-- Remove the bolt -arrow- on the left and right.

GWWA23-10689Courtesy of AUDI OF AMERICA, LLC

-- Unclip and remove the lower section -1- of the air duct.

NOTE:

Lay a cloth below the coolant pipe to catch escaping coolant.

Fig 1: Identifying Coolant Hose Clamps
GWWA19-11612Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the coolant hoses -1 and 2- with :3094  .

-- Loosen the clamps and remove the coolant hoses.

-- Remove the bolts -arrows- and the front coolant pipe.