Overview - Rear Seat Backrest

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Rear Seat Backrest

Courtesy of AUDI OF AMERICA, LLC

Release Cable
- Removing and installing. Refer to REAR SEAT BACKREST LOCKING MECHANISM, REMOVING AND INSTALLING .
Backrest Frame
- Removing and installing. Refer to BACKREST PANEL/BACKREST FRAME, REMOVING AND INSTALLING .
Cover
- Removing and installing. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING .
- Clipped in the backrest frame
Nut
- 45 Nm
- Quantity: 2
Inner Spacer
- Allocation. Refer to the Parts Information.
- Removing and installing. Refer to BACKREST PANEL/BACKREST FRAME, REMOVING AND INSTALLING .
Backrest Shell
- Removing and installing. Refer to BACKREST PANEL/BACKREST FRAME, REMOVING AND INSTALLING .
Cover
- For the child seat anchor
- Removing and installing. Refer to REAR CHILD SEAT ANCHOR, REMOVING AND INSTALLING, REAR SEAT BACKREST .
- Can only be installed in one position
- Quantity: 2
Bolt
- Tightening specification. Refer to -item 6- Bolts .
Child Seat Anchor
- Removing and installing. Refer to REAR CHILD SEAT ANCHOR, REMOVING AND INSTALLING, REAR SEAT BACKREST .
- Quantity: 2
Cover
- Removing and installing. Refer to REAR CHILD SEAT ANCHOR, REMOVING AND INSTALLING, REAR SEAT BACKREST .
- Replace the damaged cover.
- Press on until it engages audibly
- Can only be installed in one position
- For the child seat anchor
- Quantity: 2
Trim
- For the locking mechanism
- Removing and installing. Refer to LOCKING MECHANISM TRIM, REMOVING AND INSTALLING .
- Insert in the retainer and press on it until it engages audibly
Nut
- 6.6 Nm
- Quantity: 4
Bolt
- 3.5 Nm
- Quantity: 2
Locking Mechanism
- For the rear seat backrest
- Removing and installing. Refer to REAR SEAT BACKREST LOCKING MECHANISM, REMOVING AND INSTALLING .
Outer Spacer
- Allocation. Refer to the Parts Information.
- Removing and installing. Refer to BACKREST PANEL/BACKREST FRAME, REMOVING AND INSTALLING .
Bolt
- Quantity: 4
Bolt
- 32 Nm
- Quantity: 2