Seat Forward/Back Adjuster Release Cable, Removing And Installing: Removing
- Follow all safety precautions when working on pyrotechnic components. Refer to SAFETY PRECAUTIONS FOR PYROTECHNIC COMPONENTS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker pin, for example.
-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Fasten the front seat on the : VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Equipped on some models: remove the storage compartment. Refer to OWNER'S MANUAL, FIRE EXTINGUISHER AND STORAGE COMPARTMENT BRACKET, REMOVING AND INSTALLING .
-- Sport seat: remove the cover and cushion from the seat pan in the area of the threaded connection. Refer to SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING .
-- Super Sport seat: remove the seat depth adjuster. Refer to SEAT DEPTH ADJUSTER, REMOVING AND INSTALLING .
-- Remove the bolts -1-.
-- Remove the seat forward/back adjuster release cable -2- from the seat pan.
-- Unclip the lower seat forward/back adjuster release cable from the seat pan.
-- Release the tab -arrow- to disengage the release cable bracket -3- from the bracket on the seat pan.
-- Disengage the release cable -1- from the seat forward/back adjustment release lever -2- and remove.