Overview - Seat Pan, Seat Forward/Back Adjustment
WARNING: This page is about a different variant/trim than selected.
- Seat Forward/Back Adjustment Handle
- Manual front seat
- Removing and installing. Refer to SEAT FORWARD/BACK ADJUSTMENT HANDLE, REMOVING AND INSTALLING .
- Seat Forward/Back Adjuster Release Cable
- Unit
- Manual front seat
- Removing and installing. Refer to SEAT FORWARD/BACK ADJUSTER RELEASE CABLE, REMOVING AND INSTALLING .
- Bolt
- 3.5 Nm
- Quantity: 2
- Seat Pan Lower Frame
- Driver side: with Driver Seat Forward/Back Adjustment Motor -V28-
- Front passenger side: with Front Passenger Seat Forward/Back Adjustment Motor -V31-
- Cannot be disassembled; motor and seat pan lower frame are pre-adjusted from the manufacturer
- Power front seat
- Removing and installing. Refer to SEAT PAN, REMOVING AND INSTALLING, POWER FRONT SEAT .
- To replace the seat belt latch install in the new lower frame
- Bolts
- 22 Nm
- Replace after removing
- Self-locking
- Clean the threaded hole for the bolt with for example a thread tap.
- Seat Pan Upper Frame
- Power front seat
- Removing and installing. Refer to SEAT PAN UPPER FRAME, REMOVING AND INSTALLING, POWER FRONT SEAT .
- Install all electrical and electronic components and wires in the new upper frame.
- Bolts
- 22 Nm
- Replace after removing
- Self-locking
- Clean the threaded hole for the bolt with for example a thread tap.