LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Seat Frames [Coupe]) >> 72 Seat Frames >> Front Seats >> Lumbar Support Adjustment Motors -V125- / -V126- / -V129- / -V130-, Removing And Installing >> Installing

Lumbar Support Adjustment Motors -V125- / -V126- / -V129- / -V130-, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

-- Engage the lumbar support -1- at the top in the backrest frame -2- -arrows-, pivot the bottom toward the rear and insert in the backrest frame.

-- Rivet the lumbar support to the backrest frame.

WARNING:
  • Follow all safety precautions when working on pyrotechnic components. Refer to SAFETY PRECAUTIONS FOR PYROTECHNIC COMPONENTS .
  • Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker pin, for example.
  • Observe all measures when installing the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .

Install in reverse order of removal.

scientia non olet · About LEMON Manuals