LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Seat Frames [Coupe]) >> 72 Seat Frames >> Front Seats >> Front Backrest, Removing And Installing >> Side Bolster, Removing And Installing >> Installing

Side Bolster, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.
WARNING:
  • Follow all safety precautions when working on pyrotechnic components. Refer to SAFETY PRECAUTIONS FOR PYROTECHNIC COMPONENTS .
  • Before handling pyrotechnic components (for example, connecting a connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
  • Follow all the instructions when installing the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .

Install in reverse order of removal.

scientia non olet · About LEMON Manuals