Cover And Cushion, Separating, Bench Seat: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the bench seat / single seats. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .
CAUTION:
There is a risk of damaging the cover.
- Do not pull on the cover. The cover can rip.
-- Disengage the molding -1- of seat cover on the seat frame.
-- Cut the cover upholstery clips -2- all the way around the seat frame with pliers.
-- Pull off cover from the cushion as far as possible and cut the upholstery clips using pliers.
-- Remove the cover from the cushion.