LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Air Conditioning (1 Of 2) [Coupe]) >> 87 Air Conditioning >> Front Heater And A/C Unit >> Instrument Panel Temperature Sensor -G56-, Removing And Installing >> Removing

Instrument Panel Temperature Sensor -G56-, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.
WARNING:

Risk of injury by the knee airbag.

  • Before working in the area of pyrotechnic components, the person must "discharge static electricity". Follow the safety precautions when working on the airbag. Refer to SAFETY PRECAUTIONS FOR PYROTECHNIC COMPONENTS (Body Interior; Safety Precautions; Safety Precautions when Working on Pyrotechnic Components).

-- Turn off the ignition.

-- Versions with ignition lock: Remove the ignition key.

-- Remove the driver side instrument panel cover (or knee airbag) -3-. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

-- Remove the Instrument Panel Temperature Sensor -G56- -2- from the mount in the storage compartment (or in the knee bar) -3-.