RECIRCULATION Door Motor -V113-, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Switch off the ignition.
-- Versions with ignition lock: Remove the ignition key.
-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
NOTE:
Right-hand drive: remove the instrument panel central tube. Refer to INSTRUMENT PANEL CROSSMEMBER .
-- Remove the bolts -arrows-.
-- Remove the Recirculation Door Motor -V113- -item 3- from the air intake duct -2-.
-- Disconnect the connector -1-.