Fresh Air/Recirculating Air/Back Pressure Door Adjuster, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Turn off the ignition.
-- Versions with ignition lock: Remove the ignition key.
-- Remove the fresh air/recirculating air/back pressure door motor. Refer to Fresh Air/Recirculating Air/Back Pressure Door Motor -V425- WITH Fresh Air/Recirculating Air/Back Pressure Door Motor Position Sensor -G644-, REMOVING AND INSTALLING .
-- Free up the wiring harness -5-.
-- Carefully remove the operating lever -1- from the lever for the fresh air/recirculating air door -8- in direction of -arrow-.
-- Remove the bolts -4 and 7-.
-- Remove the adjuster -6-.