Condensation Water Drain Hose, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the center console. Refer to CENTER CONSOLE, REMOVING AND INSTALLING .
WARNING:
Danger of the airbag control module malfunctioning due to corrosion on the connector.
- Seal the connector for the airbag control module to protect it from moisture.
-- Remove the connector from the airbag control module. Refer to AIRBAG CONTROL MODULE .
-- Cover the airbag control module and the corresponding connector -4- with a liquid-tight cover.
-- Carefully move the carpet aside and cover it in the area under the condensation water drain hose with a liquid-tight cover and absorbent paper.
-- Remove the condensation water drain hose -3- from the heater and A/C unit -1- and the vehicle body -5-.