PRESET KNOB FOR TEMPERATURE (AND A/C SYSTEM OPERATION) ON Front A/C Display Control Head 3 -E776-, REMOVING AND INSTALLING: Removing
-- Remove the Rear Window Defogger Button -E230- -G- and Fresh Air and Recirculating Air Mode Button -E781- /Defrost Button -E782- -F-. Refer to Rear Window Defogger Button -E230-, REMOVING AND INSTALLING and FRESH AIR AND Recirculating Air Mode Button -E781- /Defrost Button -E782-, REMOVING AND INSTALLING .
-- Remove the left center instrument panel vent -B- and the right center instrument panel vent -D-. Refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING and OVERVIEW - INSTRUMENT PANEL .
-- Remove the center instrument panel vent -C-. Refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING and OVERVIEW - INSTRUMENT PANEL .
-- Release and disconnect the connector -2-.
-- Release the pin -3- and remove it -arrow-.
-- Remove the Front A/C Display Control Head 3 -E776- -4- from the removed instrument panel vent -arrow-.