PRESET KNOB FOR FRESH AIR BLOWER SPEED (AND A/C SYSTEM OPERATION) ON Front A/C Display Control Head 2 -E775-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the Fresh Air and Recirculating Air Mode Button -E781- /Defrost Button -E782- -F-. Refer to FRESH AIR AND Recirculating Air Mode Button -E781- /Defrost Button -E782-, REMOVING AND INSTALLING .
-- Remove the left center instrument panel vent -B-. Refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING and OVERVIEW - INSTRUMENT PANEL .
-- Release and disconnect the connector -2-.
-- Release the pin -3- and remove it -arrow-.
-- Remove the Front A/C Display Control Head 2 -E775- -4- from the removed instrument panel vent -arrow-.