Vehicle Interior Forced Air Extraction, Removing And Installing: Notes
Depending on the vehicle version, there is different airflow routing and forced air extraction vent frames -A-. The following illustrations show the versions as they are installed in the Audi TT Coupe. Removing and installing the forced air extraction is performed the same way on the Audi TT Roadster.
These illustrations show the components as they are installed on the Audi TT Coupe. These deviate on other versions of the vehicle.
For vehicles without a cover in the luggage compartment side trim panel (current Audi TT series production), the side trim panel (left and/or right) is to be removed (so that the vent frame tabs can be loosened to remove) if the forced air extraction vent frame -A- is going to be reused after removing. Luggage compartment side trim panel, removing. Refer to OVERVIEW - LUGGAGE COMPARTMENT SIDE TRIM PANEL .