Air Quality Sensor -G238- /Humidity Sensor In Fresh Air Intake Duct -G657-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the plenum chamber cover. Refer to OVERVIEW - PLENUM CHAMBER COVER .
-- Release the securing tab -4- and turn the housing -2- for the Air Quality Sensor -G238- / Humidity Sensor In Fresh Air Intake Duct -G657- counter-clockwise -arrow-.
-- Remove the housing from the fresh air intake grille -1-.
-- Disconnect the connector -3-.
NOTE:
Do not store a removed Air Quality Sensor -G238- with the Humidity Sensor In Fresh Air Intake Duct -G657- in areas where it may come in contact with solvents, fuels and certain other chemicals (fluids or gases).