LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Exhaust System, Emission Controls [CNTC,CYFB] (1 Of 2) [Coupe]) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Muffler, Removing And Installing >> Muffler, Removing And Installing, AWD Vehicles >> Removing

Muffler, Removing And Installing, AWD Vehicles: Removing

WARNING: This page is about a different variant/trim than selected.

-- TT Roadster: remove the rear left diagonal brace. Refer to Underbody Trim Panel .

-- Loosen the clamping sleeve -arrow- and push it toward the rear.

GWWA26-11377Courtesy of AUDI OF AMERICA, LLC

-- If equipped, disconnect the left and right connector -3- from the exhaust door control unit -2-.

Fig 1: Exhaust Door Control Unit - Tightening Specification
GWWA26-11319Courtesy of AUDI OF AMERICA, LLC

-- Disengage the mounting -3- from the exhaust system rear section.

GWWA26-11353Courtesy of AUDI OF AMERICA, LLC
WARNING:

Risk of accident due to the weight of the muffler.

  • A second technician is required to remove the rear muffler.

-- Remove the bolts -1 and 2- and then remove the muffler.