Special Tools
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Press Plate: VW401
- Press Plate: VW402
- Press Piece - Rod: VW407
- Press Piece - Multiple Use: VW412
- Press Piece - Multiple Use: VW454
- Press Piece - Multiple Use: VW455
Special tools and workshop equipment required
- Support Channels: VW457
- Press Piece - Reverse Gear Syncro: 3296
- Gearbox Support: T10108 with Counter Holder: T10108/1
- Puller - Taper Roller Bearing: VAG1582
- Puller - Taper Roller Bearing - Adapter 13: VAG1582/13
- Torque Wrench 1601: VAG1601
Fig 3: Identifying Special Tools - Needle Bearing (Polygon Bearing) For Right Flanged Shaft, Replacing
Special tools and workshop equipment required
- Press Plate: VW401
- Press Plate: VW402
- Press Piece - Rod: VW407
- Press Piece - Multiple Use: VW412
- Bearing Installer - Rear Wheel Bearing Kit: VAS3253
- Bearing Installer - Needle Bearing: T10047
Special tools and workshop equipment required
- Used Oil Collection and Extraction Unit: SMN372500
- Puller - Flanged Shaft: T10037
- Seal Installer - Flange Shaft: T10049
- Socket And Extended Bit: T10107A
- Seal Installer - Bevel Box: T10243
- Seal Installer - Bevel Box: T10298
- Puller - Crankshaft/Power Steering Seal: T20143
- Socket AF 34mm: T50019
- Dial Indicator: VAS6080A
- Charging Device For BorgWarner Coupling 2: VAS6291A
- If necessary: Oil Filler - Adapter 6: VAS6262/6 or Oil Filler - Adapter: VAS6262/7
- Charging Device For BorgWarner Coupling 2 - Adapter 3: VAS6291/3
- Seal Installer - Crankshaft: VW204B
- Dial Gauge Holder: VW387
- Press Piece - Multiple Use: 40-105
- Engine Sling - Engine Bracket: 2024A/1
- Hose Clamps - Up To 25 mm: 3094
- Seal Installer - Flange Shaft: 3305
- Seal Installer - Flange Shaft: 3377