Right Seal, Replacing, Fwd Vehicles

Special tools and workshop equipment required 

• Puller - Crankshaft/Power Steering Seal: T20143 
• Puller - Crankshaft/Power Steering Seal: T20143/2 
• Seal Installer - Flange Shaft: 3377 
• Sealing Grease Refer to the Parts Information.

Procedure 

• The transmission is installed.

-- Remove the right flange shaft. Refer to RIGHT FLANGE SHAFT, REMOVING AND INSTALLING .

-- Remove the seal using the : T20143/2 

-- Coat the outer edge and sealing lips on the new seal with transmission fluid.

Fig 1: Identifying Oil Seal

Courtesy of AUDI OF AMERICA, LLC

-- Fill the space between the sealing/dust lip -arrow- halfway with sealing grease. Refer to the Parts Information for the correct Sealing Grease.

-- Install the seal all the way in using the : 3377  . Be careful not to tilt it.

Fig 2: Driving New Seal In As Far As Stop

Courtesy of AUDI OF AMERICA, LLC

-- Install the right flange shaft. Refer to RIGHT FLANGE SHAFT, REMOVING AND INSTALLING .