Overview - Transmission Fluid Circuit
WARNING: This page is about a different variant/trim than selected.
- Transmission
- O-Rings
- Always replace after removing
- Bolt
- 20 Nm + 45°
- Always replace after removing
- Transmission Fluid Cooler
- Removing and installing. Refer to TRANSMISSION FLUID COOLER, REMOVING AND INSTALLING .
- Filter Housing
- 20 Nm
- Removing and installing. Refer to TRANSMISSION FLUID FILTER, REMOVING AND INSTALLING .
- O-ring
- Always replace after removing
- Filter Element
- Always replace O-ring after removing
- With O-ring on suction collar
- Removing and installing. Refer to TRANSMISSION FLUID FILTER, REMOVING AND INSTALLING .