Special Tools
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Pry Lever: 80-200
- Transmission Support: 3282
- Transmission Support - Pins 29: 3282/29
- Transmission Support - Mounting Plate 42A: 3282/42A
- Engine Bung Set: VAS6122
- Engine and Gearbox Jack: VAS6931
Special tools and workshop equipment required
- Holding Plate: VW309A
- Holding Fixture: VW313 or
- Engine and Gearbox Bracket: VAS6095A
- Transmission Support: VW353
- Holding Fixture: VW540
Special tools and workshop equipment required
- Used Oil Collection and Extraction Unit: SMN372500
- Wrench - Pump/Injector Long Reach: T10054
- Socket And Extended Bit: T10107A
- Wedge Set: T10383
- Locking Button Removal Tool: T40203
- Shop Crane: VAS6100
- Oil Filler: VAS6262A
- If necessary: Oil Filler - Adapter 6: VAS6262/6 or Oil Filler - Adapter: VAS6262/7
- Engine Support Bridge - Additional Hooks (2 pc.): 10-222A/2
- Engine/Gearbox Support Shackle (2 pc.): 10-222A/12
- Engine Support Bridge - Special Hook (2 pc.): 10-222A/20
- Engine Sling - Engine Bracket: 2024A/1
- Hose Clamps - Up To 25mm: 3094
- Engine Support Device: 3300A
- Trim Removal Wedge: 3409
- Vehicle Diagnostic Tester