LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Controls, Housing [Coupe]) >> 34 Controls, Housing >> Selector Mechanism >> Selector Mechanism, Removing And Installing >> Installing

Selector Mechanism, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal while noting the following:

CAUTION:

Risk of damaging the operating cable by deforming it.

- Never bend the operating cable too sharply or kink it.

-- Adjust the selector lever cable. Refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING .

-- Check the selector mechanism and the closing locks. Refer to SELECTOR MECHANISM, CHECKING .