Overview - Selector Mechanism, AUDI A1
WARNING: This page is about a different variant/trim than selected.
- Handle with Shift Cover
- Overview. Refer to OVERVIEW - SELECTOR LEVER HANDLE, AUDI A1 .
- Shift Mechanism
- With integrated Selector Lever Sensor System Control Module -J587- with Selector Lever -E313-, Tiptronic Switch -F189-, Selector Lever Park Position Lock Switch -F319- and Shift Lock Solenoid -N110-.
- Removing and Installing. Refer to SELECTOR MECHANISM, REMOVING AND INSTALLING .
- Bolt
- 8 Nm
- Quantity: 4
- Plugs
- Not available
- Nut
- 8 Nm
- Quantity: 4
- Shifter Housing
- Selector housing can only be replaced with the selector mechanism. Refer to SELECTOR MECHANISM, REMOVING AND INSTALLING .
- Transmission
- Bolt
- 20 Nm + 90°
- Replace after removing
- For attaching the cable bracket to the transmission
- Quantity: 2
- Lock Washer
- Replace after removing
- Lock Washer
- Replace after removing
- Lock Washer
- Replace after removing
- Selector Lever Cable
- Selector lever cable can only be replaced with the selector mechanism. Refer to SELECTOR MECHANISM, REMOVING AND INSTALLING .
- Checking and Adjusting. Refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING .