Emergency Release From P, AUDI Q3
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Wedge Set: T10383
Procedure
-- Move the selector lever into "D/S" position.
-- Pull the parking brake button to activate the electro-mechanical parking brake.
-- Carefully pry out the selector lever boot with the Wedge Set : T10383/1 on both sides in direction of -arrows- and then fold it upward.
-- With a screwdriver push the plastic part -1- from the top and hold it in this position.
- The solenoid releases the selector lever.
-- When the solenoid is released, press the button in the selector lever handle and move the selector lever out of "P".
- If the selector lever is shifted back into "P", the shift lock solenoid will mechanically lock the selector lever in the "P" position again.